Lateral RO Membrane

Customaize RO membrane Application Form

WSD lateral membrane elements are rolled with perforated tape which allows raw water to disperse and enter from the side. Compared to a standard membrane, less inlet water is needed to reach average permeate flaw, thereby saving energy and reducing consumption.


■ Lateral Membrane Specification

 

Model

Stable Rejection Rate

Minimum Rejection Rate

Average Permeated Flow ( GPD ) 

Residential Reverse Osmosis

C-MAT 1512-50G

98%

96%

60

C-MAT 1812-75G

98%

96%

85

C-MAT 1812-80G

98%

96%

90

C-MAT 1812-100G

98%

96%

110

C-MAT 2012-150G

98%

96%

200

Commercial Reverse Osmosis

C-MAT 3012-400G

98%

96%

450

C-MAT 3012-500G

98%

96%

550

C-MAT 3012-600G

98%

96%

700

C-MAT 3013-500G

98%

96%

550

C-MAT 3013-600G

98%

96%

700

 

1inch=25.4mm

Model

Overall Dimension

A

B1

B2

C

D

E

C-MAT 1512-50G

11.74(298)

1.18(30)

0.98(25)

0.67(17)

1.65(42)

9.57(243)

C-MAT 1812-75G

11.74(298)

1.18(30)

0.98(25)

0.67(17)

1.83(46.5)

9.57(243)

C-MAT 1812-80G

11.74(298)

1.18(30)

0.98(25)

0.67(17)

1.83(46.5)

9.57(243)

C-MAT 1812-100G

11.74(298)

1.18(30)

0.98(25)

0.67(17)

1.83(46.5)

9.57(243)

C-MAT 2012-150G

11.74(298)

1.18(30)

0.98(25)

0.67(17)

1.99(50.5)

9.57(243)

C-MAT 3012-400G

11.74(298)

0.59(15)

0.87(22)

0.67(17)

3.01(76.5)

10.3(261)

C-MAT 3012-500G

11.74(298)

0.59(15)

0.87(22)

0.67(17)

3.01(76.5)

10.3(261)

C-MAT 3012-600G

11.74(298)

0.59(15)

0.87(22)

0.67(17)

3.01(76.5)

10.3(261)

C-MAT 3013-500G

13.11(333)

0.59(15)

0.98(25)

0.67(17)

3.01(76.5)

11.53(293)

C-MAT 3013-600G

13.11(333)

0.59(15)

0.98(25)

0.67(17)

3.01(76.5)

11.53(293)

*Allowable tolerance range ±0.5mm
Note: Membrane elements and size based on customer enguiries


■ Features and Advantages of Products
1.Qualified for wide range of raw water sources less than 2000 PPM high salt groundwater and brine are especially suitable.
2.Energy saving and environmentally conscious water pumps more extensive with low pump power and high water production.
3.Clear advantages with the lateral membrane's longer flow path.


■ Regular Membrane vs.Lateral Membrane Comparison Table (Same Membrane Area Under the Same Conditions)
For Example: 1812-100G:
Testing Conditions :
Feedwater Pressure-90Psi(0.62MPa)
Concentration of Testing Solution:1000PPM
Inlet Temperature: 25°C
*Depending on different specifications of diferent regions of the film.

 

Regular RO Membrane

Lateral RO Membrane

Rejection Rate: Lateral membrane has on average higher rejection rate than normal membrane by 5%-10%

Recovery Rate: Lateral membrane has on average higher recovery rate than nommal membrane by 15%

Flow Rate: Lateral membrane has on average higher flow rate than normal membrane by 10%

End Face Inlet, Parallel Multi-Channel Waterway

 Side Inlet, Series Single Channel Lengthened Waterway

 

● Product performance may vary under different conditions. The information on this website is for reference only and is not intended to be used as a basis for performance guarantees in actual applications. WSD reserves the right to make changes. If required, clients may consult with our sales representatives about the latest information, of which no further notice will be given.

Customaize RO membrane Application Form

Dear Customer, Thank you for choosing SuZhou WSD Purification Technology Co., Ltd. for manufacturing your valuable RO membrane. We have over a decade of experience in rolling RO membranes. We hope you can have a satisfying experience here with us. Please fill in the size you want for each part of your membrane, and let us know the specification you are looking for. Our technical team will try their best to make it happen. 

Model

Overall Dimension (mm)

1. Whether to customize labels
2. Whether to use a raw water seal
3. Is there any specific design drawing

As an experienced RO membranes factory, we have our testing conditions, but if your element needs different conditions to test, please let us know so we can satisfy your need more clearly and quickly.

Testing Conditions (Default)

Residentail RO (≤ 300G)

60 psi

Commercial RO (≥ 400G)

90 psi

Inlet Temperature

25 ℃

Concentration

250 ppm NaCl

Recovery Rate

25%

Minimum Rejection rate

96%

Stable Rejection rate

98%

Customaize Testing Conditions (If Any)

Residentail RO (≤ 300G)

Commercial RO (≥ 400G)

Inlet Temperature

Concentration

Recovery Rate

Expected Rejection rate

Your company name

Contact name

Phone

E-mail

If there is any question that you want to know more about our customized membrane section, please do not hesitate to contact us and we are more than happy to answer your enquiry. TEL：0512-82757888 E-mail: Customer_service@wsdtec.net 

Download Custom Membrane Request Form
Submission
%{tishi_zhanwei}%