MBR Membrane Module

■ MBR Membrane Components

Easy maintenance, long service life

Ultrafiltration membrane components use PVDF reinforced membrane, which is resistant to pollution, easy to clean and has a long service life.

Reasonable structure

The membrane components are packaged in a clustered and dispersed manner, and the membrane wire spacing is reasonable, which can maintain the filtration flux and reduce sludge clogging.

Proprietary packaging technology

The membrane wires at the bottom of the membrane module are packaged using proprietary technology to avoid the problem of wire breakage during the swinging process of the bottom membrane wires.

Wide range of applications

It is suitable for sewage treatment such as urban sewage, recycled water reuse, industrial wastewater, and garbage leachate.

■ Technical Parameters of MBR Membrane Modules

 

Membrane Module Model

WSD@-1000MF

WSD@-1500ME

WSD@-2000MF

Basic Parameters

 

 Membrane Module Size (mm) 1025x620 1525x620 2025x620
Effective Membrane Area (m²) 10 15 20
Membrane Material PVDF
Membrane Pore Size (μm) 0.05~1
How to Save Wet storage/dry storage
Operation Parameters Design Flux (L/(m² .h)) 10~25
How It Works Suction filtration
Suction Pressure -5~50
Operation Mode Intermittent operation, water production (7~10) min + air exposure (1~3) min
Backwash Pethod Air-water backwash
Backwash Time (s) 30-120
Recoil Interval (min) 30~120
Backwash Flow Rate (L/(m² .h)) 20~30
Backwash Pressure (KPa) 60+△P
Air Scrubbing Intensity (L/(min.m²)) 3~8
Note: The above parameters are for reference only. The final right of interpretation belongs to the manufacturer.

■ Submerged Membrane Module

Ultrafiltration membrane technology

It can completely remove pollutants such as bacteria, viruses, colloids, macromolecular organic matter, algae, etc.

Adopting lining type PVDF membrane

The membrane wire has high strength, good toughness, acid and alkali resistance, strong oxidation resistance and long service life.

Strong anti-pollution ability

Combined air-water cleaning facilitates the removal of pollutants from the membrane surface.

Wide range of applications

It is suitable for sewage treatment such as urban sewage, recycled water reuse, industrial wastewater, and garbage leachate.

■ Technical Parameters of Submerged Ultrafiltration Membrane Components

 

Membrane Module Model

WSD@-1000DF

WSD@-1500DF

WSD@-2000DF
Basic Parameters Membrane Module Height (mm) 1025 1525 2025
Effective Membrane Area (m²) 12 18 25
Membrane Material PVDF
Membrane Pore Size (μm) 0.03
How to Save Wet storage/dry storage
Operation Parameters Influent Turbidity (NTU) ≤100
Design Flux (L/(m² .h)) 10~70
How It Works Suction filtration
Suction Pressure -20~80
Filtration Cycle (h) 2~4
Backwash Method Air-water backwash
Backwash Time (s) 1~2
Backwash Pressure (MPa) 0.12
Backwash Flow Rate (m³/h/Curtain Membrane) 0.5 0.7 1
Aeration Pressure (MPa) 0.05
Air Scrubbing Intensity (L/(min.m²)) 60
Note: The above parameters are for reference only. The final right of interpretation belongs to the manufacturer.
 

● Product performance may vary under different conditions. The information on this website is for reference only and is not intended to be used as a basis for performance guarantees in actual applications. WSD reserves the right to make changes. If required, clients may consult with our sales representatives about the latest information, of which no further notice will be given.